Lubrication

Lubrication

10 Steps to Getting More From Your Equipment Lubricants

Just like everything else, lubricants have a shelf-life. If you treat them right, this can be anywhere between six months to three years depending on the type. However, lubricants will only reach their max life expectancy if they are stored and cared for properly.

See More
Lubrication

Avoid Oil Sampling Pitfalls

Oil analysis is a valuable tool for determining the condition of lubricating oil and the equipment it lubricates. It is best used as a trending process — not a one-time event. When collecting oil samples for routine oil analysis, where and how should you do it?

See More
Lubrication

Best Practices in Lubrication

Like blood coursing through the veins of living beings, lubrication is what keeps a plant’s capital investments operating smoothly and efficiently. At the same time, when lubrication becomes contaminated or depleted of its sustaining properties, overheating or exhaustion are among the problems that can occur. That leads to downtime and loss of production, and the potential of some hefty maintenance expenses.

See More
Lubrication

On-Site Fluid Intelligence: A Revolution to Advance Machinery Reliability

Using in-service oil analysis to improve machinery reliability has a long history. The first oil analysis was performed over half a century ago on a locomotive engine. Just as a human blood test provides important information about your health, the information provided by in-service oil analysis about machinery health, especially for a piece of complex machinery with many moving parts, such as a diesel engine, is unmatched by any other technologies on the market.

See More
Lubrication

7 Steps to Trouble-free Grease Lubrication

The result of their failure can be unexpected downtime, higher maintenance costs or even personnel safety risks. In the worst cases, human lives may be at stake. It is time to stop treating grease as some simple substance that just needs to be pumped into machines at some random frequency and then hoping for the best. Machine greasing must be a systematic and carefully planned process to ensure safe operation of assets and to achieve maximum equipment life.

See More
Lubrication

Best Practices for Lubricating Paper Machines

One of the best ways to achieve fault-free operation of paper machines is to ensure the proper lubricant is applied to the frictional surfaces. Most paper machines have hundreds, if not thousands, of lube points that require periodic application of oil or grease. There are bearings, gears, couplings, journals, cylinders and valves which must all receive the correct lubricant to survive the rigors of the paper-making process.

See More
Lubrication

3 Outlooks on What’s Trending and What’s Important in Industrial Lubrication and Oil Analysis

Machinery and Equipment MRO interviewed three oil and lubrication specialists to uncover industry trends that are important to suppliers and users alike. They were asked to consider factors that significantly influence decision-making on more easily protecting equipment, and to share insights on what’s new, what holds value and provides improvements, as well as what helps solve common problems.

See More
Lubrication

Safety Tips for Handling Petroleum Products

High-pressure injection injuries, also known as grease gun injuries, are caused by the accidental injection of a foreign material–such as grease, oil, or solvent under pressure–through the skin and into the underlying tissue. This is analogous to medical techniques used to administer immunization shots without a needle. A grease gun injury can cause serious delayed soft tissue damage and should be treated as a surgical emergency. Any person sustaining an injury of this sort should seek immediate medical attention, regardless of the appearance of the wound or its size. Accidents involving injection injuries can occur when using any type of pressurized equipment.

See More
Lubrication

How to Determine Lubricant Mixing

Unfortunately, there is not an easy way to tell if lubricants have been mixed unless they have vastly different viscosities, such as ISO 32 and ISO 680. The best solution would be to avoid this problem in the first place by having trained staff members and well-labeled/color-coded equipment. Using a different sealable and reusable container for each lubricant can help to prevent cross-contamination.

See More

Join the discussion

Click here to join the Maintenance and Reliability Information Exchange, where readers and authors share articles, opinions, and more.

Get Weekly Maintenance Tips

delivered straight to your inbox